Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 269
7.11.6.2 Statistics Options
The test report can be analyzed by using the statistics options tabulated below:
Parameter Description
Traffic Statistics
Tx Packets Total packets transmitted from the moment user initiated the test.
Rx Packets Total packets received from the moment user initiated the test.
Lost Packets Packets lost due to any reason.
Duplicated Packets Number of packets received in duplicate for the already received
packets.
Tx Rate The rate at which the packets are sent.
Rx Rate The rate at which the packets are received.
Wireless Statistics
Phy Errors Total number of error packets received from the moment user
initiated the test . The possible reasons:
`
It indicates the interference in the wireless medium
`
Low signal level
CRC Errors Number of packets received with invalid CRC. The possible reasons:
`
It indicates the interference in the wireless medium
`
Low signal level
Medium Busy Number of times the radio detected busy medium while trying to
transmit the frame. This could be due to interference on that
specific channel.
WORP Statistics
Send success Refers to the number of data messages sent and acknowledged by
the peer successfully.
Send failure Refers to the number of data messages that are not acknowledged
by the peer even after the specified number of retransmissions.
Send retires Refers to the number of data messages that are re-transmitted and
acknowledged by the peer successfully.
Receive success Refers to the number of data messages received and acknowledged
successfully.
Receive failures Refers to the number of successfully received re-transmitted data
messages.
Receive retires Refers to the number of data messages that were not received
successfully.