User's Manual

Technical Specifications
Tsunami
®
800 and 8000 Series - Hardware Installation Guide 123
Receive Sensitivity
Note:
Output Power Attenuation: 0 – 22 dB, in 1 dB steps
Output Power Values will have a tolerance of +/-2 dB
Total EIRP must be calculated based on integrated 15 dBi antenna gain
* Tx Power findicated above is the combined power.
Products Stream Modulation
Receive Sensitivity (dBm)
2.4 GHz 5 GHz
40
MHz
20
MHz
10
MHz
5 MHz 40
MHz
20
MHz
10
MHz
5 MHz
MP-8100-BSU
MP-8100-SUA
MP-8150-SUR
MP-8150-SUR-100
QB-8100-EPA/LNK
QB-8150-EPR/LNK
QB-8150-LNK-100
QB-8151-EPR/LNK
Single
Stream
BPSK 1/2 -89 -92 -95 -96 -87 -92 -94 -97
QPSK 1/2 -89 -91 -95 -96 -87 -89 -91 -95
QPSK 3/4 -88 -89 -92 -94 -84 -87 -89 -92
16 QAM 1/2 -85 -87 -88 -93 -81 -83 -86 -89
16 QAM 3/4 -82 -85 -84 -90 -78 -80 -83 -86
64 QAM 2/3 -77 -78 -83 -84 -73 -75 -78 -81
64 QAM 3/4 -76 -77 -81 -83 -72 -74 -77 -80
64 QAM 5/6 -74 -73 -79 -81 -70 -72 -75 -78
Dual
Stream
BPSK 1/2 -85 -87 -90 -93 -87 -90 -92 -95
QPSK 1/2 -83 -85 -87 -89 -84 -87 -89 -92
QPSK 3/4 -79 -81 -84 -86 -81 -84 -87 -90
16 QAM 1/2 -77 -78 -82 -85 -78 -81 -84 -87
16 QAM 3/4 -73 -75 -78 -80 -75 -78 -80 -83
64 QAM 2/3 -68 -71 -74 -76 -71 -73 -76 -79
64 QAM 3/4 -66 -68 -71 -74 -69 -72 -74 -78
64 QAM 5/6 -64 -66 -70 -72 -68 -70 -73 -76
Note: Receive Sensitivity values should be considered with a tolerance +/- 2 dB.
5.900 - 6.425 GHz