User's Manual

Technical Specifications
Tsunami
®
800 and 8000 Series - Hardware Installation Guide 134
Products Category Specification
MP-826-CPE-50 Input Voltage
y
Via RJ-45 Ethernet interface supplying 48 VDC and 0.40A on Ethernet Port
y
Consumption of 10 Watts typical (18 Watts max with one heater ON)
PoE Injector
y
Input: 100 – 250 V-AC (47 – 63 Hz)
y
Output: 48 V-DC at 0.40 A (19 Watts)
y
Pin-out: +48 V on pins 4/5, -48 V on pins 7/8
y
Size: 4.96 x 8.62 x 2.58 inches (126 x 219 x 65.5 mm)
y
Weight: 5.6 ounces (160 g)
y
Temp: 0 to 40º C
Products Category Specification
MP-8160-CPE-A100 Input Voltage
y
Via RJ-45 Ethernet interface supplying 48 VDC and 0.40A on Ethernet Port
y
Consumption 5 Watts typical (10 Watts maximum)
PoE Injector
y
Input: 100 – 250 V-AC (47 – 63 Hz)
y
Output: 48 V-DC at 0.40 A (19 Watts)
y
Pin-out: +48 V on pins 4/5, -48 V on pins 7/8
y
Size: 3.98 x 2.40 x 1.35 inches (101.0x61.5x32.2 mm)
y
Weight: 5.6 ounces (160 g)
y
Temp: 0 to 40º C
Products Category Specification
MP-825-CPE-50
MP-825-CPE-100
QB-825-EPR-50
Input Voltage
y
Via RJ-45 Ethernet interface supplying 48 VDC and 0.40A on Ethernet Port
y
Consumption 6 Watts typical (15 Watts max with two heaters ON)
PoE Injector
y
Input: 100 – 250 V-AC (47 – 63 Hz)
y
Output: 48 V-DC at 0.40 A (16 Watts)
y
Pin-out: +48 V on pins 4/5, -48 V on pins 7/8
y
Size: 3.98 x 2.40 x 1.35 inches (101.0x61.5x32.2 mm)
y
Weight: 5.6 ounces (160 g)
y
Temp: 0 to 40º C