User's Manual

Technical Specifications
Tsunami
®
800 and 8000 Series - Hardware Installation Guide 135
Hardware Specifications
Products Category Specification
MP-820-BSU-100
MP-820-SUA-50
+
MP-825-SUR-50
+
MP-825-BS3-100
QB-825-EPR/LNK-50
+
Input Voltage
y
Via RJ-45 Ethernet interface supplying 48 VDC and 0.67A on Ethernet Port#1
y
12 V-DC through RJ-11 serial port (for diagnostic purpose)
: Only one of the above input voltage options should be used at a time, to
power on the device. Combination of any two options, may damage the
device.
Power
Consumption
y
Typical Consumption: 6 Watts
y
Consumption (With Heaters ON): 16 Watts maximum, with two heaters ON
PoE Injector
y
Input: 100 – 250 V-AC (47 – 63 Hz)
y
Output: 48 V-DC at 0.67 A (32 Watts)
y
Pin-out: +48 V on pins 4/5, -48 V on pins 7/8
y
Size: 5.24x2.13x1.42 inches(133x54x36 mm)
y
Weight: 7 ounces (200 g)
y
Temp: 0 to 40º C
Products Radio Clock
Speed
Memory Input Power Power Consumption
MP-8100-BSU
MP-8100-SUA
QB-8100-EPA
2.4 and 5 GHz
MIMO dual band
radio
680 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
6 Watts typical (17 Watts
max with two heaters ON)
MP-8150-SUR
QB-8150-EPR
4.900 to 5.925 GHz
MIMO radio
680 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
6 Watts typical (17 Watts
max with two heaters ON)
MP-820-BSU-100
MP-820-SUA-50
+
MP-825-SUR-50
+
MP-825-BS3-100
QB-825-EPR-50
+
5.150 to 5.925 GHz
MIMO radio
560 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
6 Watts typical (16 Watts
max with two heaters ON)
MP-8150-SUR-100
QB-8150-EPR-100
QB-8151-EPR
4.900 to 5.875 GHz
MIMO radio
680 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
6 Watts typical (17 Watts
max with two heaters ON)
MP-8200-BSU
MP-8250-BS9
MP-8250-BS1
MP-8200-SUA
MP-8250-SUR
QB-8200-EPA
QB-8250-EPR
4.900 to 5.925 GHz
MIMO High Power
radio
680 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
12 Watts typical (22 Watts
max with two heater ON)
MP-8160-BSU
MP-8160-BS9
MP-8160-SUA
5.900 to 6.425 GHz
MIMO radio
680 MHz Flash: 16 MB
RAM: 128 MB
Power-over-Ethernet
48 VDC, 0.67 A
10 Watts typical (13.8
Watts max with one heater
ON)