User's Manual Part 2

CLI for Mesh and Access Point Module MeshMAX 5054 Series User Guide
User Guide
304
* Also for 802.11g-wifi mode. 802.11g-wifi has been defined for Wi-Fi testing purposes; it is not recommended for use in your wireless network
environment.
† Available in 802.11b/g or 802.11g modes only.
Transmit Rate Integer32 For 802.11b-only mode:
0 (auto fallback; default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
For 802.11g-only mode:*
0 (auto fallback; default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
For 802.11b/g mode:
0 (auto fallback; default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW txrate
Physical Layer Type Integer ERP (Extended Rate Protocol) R phytype
Regulatory Domain List DisplayString Varies by regulatory domain:
USA -- FCC
Europe -- ETSI
Russia -- RU
Japan -- TELEC
Brazil
Argentina
Saudi Arabia
Israel -- IL
World Mode -- WO
Undefined
R regdomain
Super Mode
†
Integer enable
disable (default)
RW supermode
Name Type Value Access CLI Parameter