User's Manual Part 2

Configuration MeshMAX 5054 Series User Guide
Advanced Configuration of Mesh and Access Point Module
171
Figure 6-47 Add RADIUS Server Profile
• Server Profile Name: the profile name. This is the name used to associated a VLAN to the profile. See
Configuring Security Profiles. The Server Profile Name is also used in the Configure > Management > Services
page to specify the RADIUS profile to be used for RADIUS Based Management Access.
• MAC Address Format Type: This parameter should correspond to the format in which the clients’ 12-digit MAC
addresses are listed within the RADIUS server and the way passwords are sent to the RADIUS server. Available
options are:
– Dash delimited/SS: MAC addresses are formatted with a dash between each pair of digits (xx-yy-zz-aa-bb),
and the password sent to the RADIUS server is the shared secret (configured below).
– Colon delimited/SS: MAC addresses are formatted with a colon between each pair of digits (xx:yy:zz:aa:bb:cc)
and the password sent to the RADIUS server is the shared secret (configured below).
– Single dash delimited/SS: MAC addresses are formatted with a dash between the sixth and seventh digits
(xxyyzz-aabbcc) and the password sent to the RADIUS server is the shared secret (configured below).
– No delimiters/SS: MAC addresses are formatted with no characters or spaces between pairs of hexadecimal
digits (xxyyzzaabbcc) and the password sent to the RADIUS server is the shared secret (configured below).
– Dash delimited/MAC: MAC addresses are formatted with a dash between each pair of digits (xx-yy-zz-aa-bb),
and the password sent to the RADIUS server is the MAC address of the client.
– Colon delimited/MAC: MAC addresses are formatted with a colon between each pair of digits
(xx:yy:zz:aa:bb:cc) and the password sent to the RADIUS server is the MAC address of the client.