User's Manual Part 2

Monitoring MeshMAX 5054 Series User Guide
Monitoring Options for Mesh and Access Point Module
208
Figure 7-12 Mesh Statistics Link Statistics Sub-Tab
Link Test
The Link Test tab allows you to run two types of Mesh link tests: Tree Type or Neighbor Type.
The Tree Type link test is initiated from the Portal to any point on the Mesh tree. The Mesh units involved in the test must
be in the "Active" state
The Neighbor Type link test is initiated from any Mesh unit and to any other Mesh unit in its neighbor list the is in the
"Connected"/"Active" state. The Mesh units involved in the test must be on the same channel.