802.
Warning Statement FCC NOTICE This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 390cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
Overview the Product Introduction The high-performance Wireless Radio Module is designed for enterprise and public access applications. Embedded with the Atheros chipset, it boasts network robustness, stability and wider network coverage. Based on 802.11n (Draft 2.0), the access point supports high-speed data transmission of up to 800Mbps.
Install in the Host This device will be build-in into Proxim’s Host Tsunami ®, and it should be professional installation. The host system must be labelled with: Contains FCC ID: HZB-NGP1058; Please refer to the user guide for the host on our web site : http://www.proxim.
