EdgeTM Multipoint and Quickbridge Safety and Regulatory Guide Products Covered --> EdgeTM - MP-1015-CPE - MP-1025-CPE - MP-1035-CPE - MP-1015-BS3 - MP-1025-BS3 - QB-1015-LNK (2 x QB-1015-EPR) - QB-1025-LNK (2 x QB-1025-EPR) - QB-1035-LNK (2 x QB-1035-EPR)
Copyright © 2021 Proxim Wireless Corporation, San Jose, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. The content described herein are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Wireless Corporation.
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 MP/QB-10xx Series - Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Information (USA, Canada and European Union) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Federal Communications Commission (FCC) Compliance . . . . . . . . . . . . . . . . . . . . . . . . .
Preface Preface About this Guide This document contains the safety and regulatory compliance information for the following EdgeTM products: • EdgeTM 10xx Series – MP-1015-CPE – MP-1025-CPE – MP-1035-CPE – MP-1015-BS3 – MP-1025-BS3 – QB-1015-LNK (2 x QB-1015-EPR) – QB-1025-LNK (2 x QB-1025-EPR) – QB-1035-LNK (2 x QB-1035-EPR) Related Documents In addition to this guide, please refer to the following documents for EdgeTM Multipoint and Quickbridge products that are available at Proxim’s support site http:/
MP/QB-10xx Series - Regulatory Information 1 This chapter contains information on the following: • Safety Information (USA, Canada and European Union) • Federal Communications Commission (FCC) Compliance • Industry Canada Compliance • Certification Summary 1.
MP/QB-10xx Series - Regulatory Information 1.2 Federal Communications Commission (FCC) Compliance The EdgeTM devices comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MP/QB-10xx Series - Regulatory Information 1.2.2 FCC Radiation Exposure Statement The EdgeTM devices comply with FCC radiation exposure limits set forth for an uncontrolled environment. Tabulated below are the products and the FCC radiation exposure limits followed by the devices: Product(s) MP-1015-CPE-100-US MP-1015-BS3-100-US MP-1025-BS3 QB-1015-LNK-100-US (2 x QB-1015-EPR-100-US) • • Standards Product models using external antennas require professional installation.
MP/QB-10xx Series - Regulatory Information • The devices are designed to operate with disabled operation between 5600-5650 MHz within the 5470-5725 MHz band. • The device automatically discontinues transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes which is required by the technology.
MP/QB-10xx Series - Regulatory Information 1.3.1 IC Radiation Exposure Statement This device complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with a minimum distance of 50cm between the antenna and the user. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
MP/QB-10xx Series - Regulatory Information 1.5 Certification Summary 1.5.1 USA (See USA - Certification) Models MP-1015-CPE-100-US MP-1015-BS3-100-US QB-1015-LNK-100-US (2 x QB-1015-EPR-100-US) Frequency Band (5.150 - 5.250)Ghz (5.260 - 5.320)Ghz (5.500 - 5.720)Ghz (5.725 - 5.850)Ghz Certification/Reference Number FCC ID: HZB-NGPLC 1.5.
MP/QB-10xx Series - Regulatory Information 1.5.
2 Information for Professional Installer This chapter contains information on the following: • Information for Professional Installers – Adjusting Tx Output Power – Antenna Gain Configuration 2.1 Information for Professional Installers All products must be professionally installed, and the transmit power of the system must be adjusted by the professional installers to ensure that the system EIRP is in compliance with the limit specified by the regulatory authority of the country of application. 2.1.
Information for Professional Installer United States2 (5.3, 5.8 GHz) 5250 ~ 5350 (DFS) 30 30 53 36(Base Station), 53(Subscriber Unit) 5725 ~ 5850 (Non-DFS) United States3 (5.2, 5.8 GHz) 5150 ~ 5250 (Non-DFS) 5725 ~ 5850 (Non-DFS) WD SKU World 5 GHz 5150 ~ 5925 (Non-DFS) 100 100 United States 5GHz 5150 ~ 5250 (Non-DFS) 53 36(Base Station), 53(Subscriber Unit) 5250 ~ 5350 (DFS) 5500 ~ 5725 (DFS) 5725 ~ 5850 (Non-DFS) United States 5.
Information for Professional Installer Calculate the antenna gain as follows: Antenna Gain to be configured = Antenna Gain of the antenna used - Cable Loss Example: Consider an example where the device is operating in United States 5.3 GHz with the EIRP 30 dBm. The antenna gain of the antenna used is 23 dBi and the cable loss is 1dB.
USA - Certification Given below are the USA certification details for the following products: • MP-1015-CPE-100-US • MP-1015-BS3-100-US • QB-1015-LNK-100-US (2 x QB-1015-EPR-100-US) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide A 15
USA - Certification Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 16
CANADA - Certification CANADA - Certification B Given below are the Canada certification details for the following products: • MP-1025-CPE-WD • MP-1025-BS3-WD • QB-1025-LNK-WD (2 x QB-1025-EPR-WD) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 17
CANADA - Certification Given below are the Canada certification details for the following products: • MP-1035-CPE-WD • QB-1035-LNK-WD (2 x QB-1035-EPR-WD) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 18
ETSI - Certification C Given below are the products with the ETSI Certfication: • MP-1025-CPE-WD • MP-1035-CPE-WD • MP-1025-BS3-WD • QB-1025-LNK-WD (2 x QB-1025-EPR-WD) • QB-1035-LNK-WD (2 x QB-1035-EPR-WD) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 19
ETSI - Certification Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 20
ETSI - Certification Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 21
UL - Certification D Given below are the products with the authorization to use UL Mark: • MP-1015-CPE • MP-1025-CPE • MP-1035-CPE • MP-1015-BS3 • MP-1025-BS3 • QB-1015-LNK (2 x QB-1015-EPR) • QB-1025-LNK (2 x QB-1025-EPR) • QB-1035-LNK (2 x QB-1035-EPR) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 22
UL - Certification Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 23
CB - Test Certificate Given below is the CB Test certification for the following products: • MP-1015-CPE • MP-1025-CPE • MP-1035-CPE • MP-1015-BS3 • MP-1025-BS3 • QB-1015-LNK (2 x QB-1015-EPR) • QB-1025-LNK (2 x QB-1025-EPR) • QB-1035-LNK (2 x QB-1035-EPR) Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide E 24
CB - Test Certificate Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 25
CB - Test Certificate Edge TM Multipoint and Quickbridge - Safety and Regulatory Guide 26
