User Manual Part 1

Lynx.GX Installation and Management
Basic Tasks with the Web Interface
The following sections introduce you to the Web Interface and the tasks that can be accomplished with each
window. For more in-depth information about the Web Interface windows, see “Web Interface Windows and
Field Descriptions” on page 56.
Task Quick Reference
To view or monitor: Click this tab: To view or monitor: Click this tab:
All or selected status alarms LOG Radio sync alarm ALARMS
Application software version DEVICE RF receive frequency DEVICE
BER (current) STATUS RF software version DEVICE
Bit error alarm ALARMS RF transmit frequency DEVICE
Boot software version DEVICE RFU serial number DEVICE
Data rate DEVICE RSL reading of radio over time STATUS/RSL button
Elapsed time since reset STATUS RSL (current) STATUS
Errored seconds STATUS RSL (max) STATUS
External Input Alarm ALARMS RSL (min) STATUS
Fan summary alarm ALARMS RSL (min) timestamp STATUS
IDU serial number DEVICE Severely errored seconds STATUS
IDU temperature STATUS Spectrum Analyzer ADMIN
Interface type DEVICE Status alarms, all or selected LOG
Major relay alarm ALARMS T-1/E-1 AIS ALARMS
Minor relay alarm ALARMS T-1/E-1 Input ALARMS
Model number DEVICE
To configure: Click this tab: To configure: Click this tab:
Alarm external inputs SYS CFG IP address ADMIN
Auxiliary port speed SYS CFG Link Security code SYS CFG
Date and time, system ADMIN Orderwire address SYS CFG
Default gateway address ADMIN System passwords ADMIN
SNMP Community Strings ADMIN T1/E1 settings INTF CFG
Tx Power SYS CFG
Chapter 3. Managing the Lynx.GX 38