User's Manual Part 1

Tsunami Multipoint Version 1.3 Installation Guide
Once mated, over-wrap the connectors (as demonstrated in the following table) with stretchy
black self amalgamating tape (such as CTB-15 CATV TAPE-X5-BK-UN part #22150000 from
DSG – CANUSA 173, Commerce Boulevard, Loveland, Ohio 45140, Tel. [phone]) to
ensure a better water seal.
1)
2)
3)
4)
5) 6)
4. Connect the other end of the Cat 5 cable to the BSU’s power supply. (The BSU’s power supply is
ordered and shipped separately. The power supply’s CPN number is 58526.)
5. Plug the power supply into an electrical outlet.
Note: To ensure proper grounding, use the hole on the back of the BSU and the provided grounding screw to attach
a ground wire to the BSU. Use wire grounding techniques in accordance with your local electrical codes.
Chapter 2. Pre-Installation Tasks 23
CPN 63179 Issue Date: 01/24/03