User Manual
Table Of Contents
- Table of Contents
- Introduction
- Installation
- Wireless Topologies
- Configuration Parameters
- Harmony Utility
- Troubleshooting
- Technical Specifications
- Technical Support and Training
- Index
Harmony Utility 41
Note to Windows XP Users
Windows XP provides built-in support for wireless networks. Windows XP’s wireless
network management features are used in lieu of the Harmony Utility. For PCI Card
users, support for the Harmony Utility is disabled by default (i.e., Windows XP wireless
settings are enabled); for CardBus Card users, support for the Harmony Utility is
enabled by default (i.e., Windows XP wireless settings are disabled).
To turn Harmony Configuration on or off, check or uncheck the box labeled Enabled
Harmony Configuration (Disable Windows XP Settings) within the Station
Configuration screen.
When this option is disabled, the Station Configuration parameters, the Security
parameters, and the 802.11a Network screen’s Transmission Test and Associate
features are unavailable within the Harmony Utility (as shown in the example below).