User Manual

Harmony Utility 43
4. Enter one to four WEP Keys in the fields provided, as shown in the following
example.
5. Use only hexadecimal digits (i.e., 0-9 and A-F). For 64-bit encryption, enter
10 digits for each Key; for 128-bit encryption, enter 26 digits for each Key; for
152-bit encryption, enter 32 digits for each Key.
Note: If you created a text file that contains the WEP Keys, click Read Keys to
upload those Keys to the adapter. See “Read Key File Format” on page 44 for
formatting information.
6. Click OK to save the WEP Keys.
7. Select one of the Keys you configured as the Default Key.