Specifications

Tsunami MP.11 5012-SUR Installation and Management
101
8
Commands
This section describes the commands that you can issue with the Web Interface.
Click the Commands button to access available commands. See the following:
• Download
• Upload
• Reboot the Unit
• Reset to Factory Default
• Help Link
Help and Exit buttons also appear on each page of the Web interface; click the Help button to access online help; click
the Exit button to exit the application.
For an introduction to the basics of management, see Basic Management.
Download
Click Commands > Download to download configuration, image and license files to the unit via a TFTP server (see
TFTP Server Setup for information about the SolarWinds TFTP server software located on your product installation CD).
The following parameters may be configured or viewed:
• Server IP address: Enter the TFTP Server IP address.
• File Name: Enter the name of the file to be downloaded. If you are using the SolarWinds TFTP server software
located on your product installation CD, the default directory for downloading files is C:\TFTP-Root.
• File Type: Choose either Config, image, BspBl, or license.
• File Operation: Choose either Download or Download and Reboot.
Click OK to start the download.