Specifications

Commands Tsunami MP.11 5012-SUR Installation and Management
Reset to Factory Default
104
Reset to Factory Default
Click Commands > Reset to restore the configuration of the 5012-SUR to the factory default values.
You can also reset the 5012-SUR by pressing the RESET button located in the unit’s cable compartment. Because this
resets the unit’s current IP address, a new IP address must be assigned.
CAUTION: Resetting the 5012-SUR to its factory default configuration permanently overwrites all changes made to the
unit. The 5012-SUR reboots automatically after this command has been issued.