Specifications

Technical Specifications Tsunami MP.11 5012-SUR Installation and Management
Transmit Power Settings
144
Transmit Power Settings
Notes:
• Output Power Attenuation: 0 – 18dB, in 3dB steps
• Output Power Values will have a tolerance of +/-1.5 dB
• Total EIRP must be calculated based on integrated 18 dBi antenna gain
Receive Sensitivity
Management
Interfaces
Power Supply
LEDs
Frequency 6-24 Mbps @ 20 MHz
16QAM ½; QPSK ¾;
QPSK ½; BPSK ¾;
BPSK ½
36 Mbps @ 20 MHz
16QAM ¾
48 Mbps @ 20 MHz
64QAM ½
54 Mbps @ 20 MHz
64QAM ¾
5.150 – 5.350 GHz 18 dBm 18 dBm 17 dBm 16 dBm
5.470 – 5.700 GHz 18 dBm 18 dBm 17 dBm 16 dBm
5.725 – 5.850 GHz 18 dBm 18 dBm 17 dBm 16 dBm
54 Mpbs 48 Mpbs 36 Mpbs 24 Mpbs 18 Mpbs 12 Mpbs 9 Mpbs 6 Mpbs
-69 dBm -73 dBm -77 dBm -81 dBm -84 dBm -87 dBm -88 dBm -89 dBm
Category Specification
Local RS-232 serial (RJ-11 and DB-9)
Remote Web GUI, Telnet, TFTP
SNMP SNMPv1/v2; MIB-II; Ethernet-like MIB; BridgeMIB;
802.3MAU;802.11 MIB; Private MIB; ORiNOCO MIB; RFC
1157; RFC 1213; RFC 1643; RFC 1493; RFC 2668
Category Specification
Wired Ethernet Wired Ethernet 10/100Base-TX Ethernet (RJ-45)
RS-232 Serial connector
Category Specification
Power-over-Ethernet Via RJ-45 Ethernet interface port 802.3af compliant
Category Specification
Types Power
Radio Activity
Ethernet Activity