Specifications

Installation and Initialization Tsunami MP.11 5012-SUR Installation and Management
Initialization
25
3. To set the IP address manually, ensure that Static is selected as the IP Address Type and fill in the IP Address and
Subnet Mask suitable for the LAN subnet to which the unit is connected.
To set the IP address dynamically, ensure that Dynamic is selected as the IP Address Type. The unit will request its
IP address from a DHCP server on your network.
4. Enter the Read/Write Password (the default value is public) and click OK to confirm your changes. The respective
unit reboots to make the changes effective.
NOTE: The number of asterisks displayed after you enter the password does not necessarily equal the number of
characters in the actual password string. This is done for added security.