Specifications

Tsunami MP.11 5012-SUR Installation and Management
51
5
System Status
This section describes viewing system status and event log information from the unit’s Web Interface.
Click on the Status button to access system and event log information. See the following sections:
• Status
• Event Log
Help and Exit buttons also appear on each page of the Web interface; click the Help button to access online help; click
the Exit button to exit the application.
For an introduction to the basics of management, see Basic Management.
Status
The Status tab showing the system status is displayed automatically when you log into the Web Interface. It also is the
default window displayed when you click the Status button on the left side of the window.
The Status tab shows the System Status and the System Traps.
System Status
The basic system status is shown in this section, including the version number of the embedded software.
Systems Traps
The status of system traps is shown in this section. System traps occur when the 5012-SUR encounters irregularities.
Deleting system traps has no effect on the operation of the 5012-SUR. System traps also are sent to an SNMP manager
station (if so configured). See “Alarm Traps” in the Tsunami MP.11 Reference Manual for a list and description of the
traps.