Installation guide

Installation Guide 23
Installing Adapters and Sniffer Enhanced Drivers
 Obtain an IP address from a DHCP server. Reads and assigns
the IP address for the driver automatically.
 Specify an IP address. You must manually enter IP address
information for the driver in each field.
18 Click OK.
19 Click Close.
20 If an application error occurs in rundll32.exe, click Cancel in the error
message box. All added or modified settings will be saved.
21 Restart your computer.
Installing Adapters and Sniffer Enhanced Drivers
on Windows 2000
The Sniffer enhanced drivers for Windows 2000 are plug and play drivers. The
default installation location for the Sniffer enhanced drivers is C:\Program
Files\ Nai\SnifferNT\Driver\en. Table 3-4 lists the supported adapters for
Windows 2000 and the subdirectories where the Sniffer enhanced drivers can
be found.
The driver installation procedure for Windows 2000 is somewhat different
depending on whether you are updating an existing driver (either a previous
version of the Sniffer driver or another vendor’s driver) or installing the adapter
and driver for the first time. Use the appropriate procedure below.
 First-time Installation (Windows 2000) on page 24
Table 3-4. Windows 2000 Sniffer Enhanced Driver Locations
Supported Adapter <local install drive>:
\Program Files\Nai
\SnifferNT\Driver\en\...
Sniffer (Adaptec) PCI Ethernet Adapter
(ANA-21140/UC & ANA-6911/UC)
Sniffer (Adaptec) PCI Ethernet Adapter
(ANA-6911A/TX/TXC)
adaptec\Win2K
Sniffer (Intel) Intel\Win2K
Sniffer (Xircom) Xircom\Win2K
Sniffer (IBM) Ibm\Win2K
Adaptec 62011 Adaptec.620XX\Win2K
100413Portable_Install.book Page 23 Friday, March 25, 2005 2:22 PM