Installation guide

Installation Guide 29

Installing Madge Adapters

and Enhanced Drivers

Overview

After installing the Sniffer Portable software, install the adapter and enhanced

driver appropriate to your Sniffer Portable configuration. This chapter provides

detailed installation instructions for Madge adapters and Sniffer enhanced

drivers.

NOTE: If you are installing a Madge Mk2 PCMCIA or CardBus adapter on

either a Windows 2000 or Windows XP PC, you must set some configuration

options for the card manually. Instructions on how to do this are found in the

corresponding installation sections. See Configuring Madge Mk2

PCMCIA\CardBus Adapters (Windows XP) on page 34 and Configuring Madge

Mk2 PCMCIA\CardBus Adapters (Windows 2000) on page 38.

Use Table 4-1 to quickly find the adapter and enhanced driver installation

instructions you need for your Sniffer Portable PC configuration.

Table 4-1. Finding What You Need in this Chapter

To perform the following... for... see...

Install Madge adapters and

enhanced drivers

Windows NT page 30

Windows XP page 33

Windows 2000 page 35

Install Madge PCI adapters

and enhanced drivers

Windows NT page 39

Windows 2000 page 35

Installing Madge PCMCIA

and CardBus adapters and

enhanced drivers

Windows NT page 40

Windows XP page 33

Windows 2000 page 35

100413Portable_Install.book Page 29 Friday, March 25, 2005 2:22 PM