Installation guide

Chapter 4
38 Sniffer Portable
21 Manually configure the Madge Mk2 driver for Sniffer Portable
operations using the procedure in
Configuring Madge Mk2
PCMCIA\CardBus Adapters (Windows 2000) on page 38.
Configuring Madge Mk2 PCMCIA\CardBus Adapters (Windows
2000)
Before you can use the Madge Mk2 PCMCIA or CardBus adapter with Sniffer
Portable on a Windows 2000 PC, you must set some configuration options
manually. The following procedure explains how.
To configure the Madge Mk2 PCMCIA or CardBus adapter:
1 Start the Device Manager as follows:
a Right-click the My Computer icon and select the Properties
command from the menu that appears.
b In the dialog box that appears, click the Hardware tab.
c Click the Device Manager button.
d Expand the Network Adapters entry by clicking the + sign
adjacent to its entry.
2 Right-click the entry for the Madge Mk2 adapter and select the
Properties command from the menu that appears.
3 Click the Advanced tab and make the following configuration changes:
 Set Promiscuous mode support to Yes.
 Set Respond to TEST/XID frames to No.
 Set Ring Speed to 16 Mbit/s.
4 Click Close.
100413Portable_Install.book Page 38 Friday, March 25, 2005 2:22 PM