Installation guide

Wireless Guide 17
Installing the ORiNOCO Gold Adapter / Driver
c In the Adapters tab, verify that the driver for the wireless adapter
appears in the following format:.
Sniffer (vendor name) - card description
If the driver for the wireless adapter does not appear in this format,
repeat the driver installation.
8 At this point, the ORiNOCO Gold wireless adapter should be installed
with the Network General driver in Windows NT. Turn to Creating Local
Agents for Wireless LAN Adapters on page 79 to create a new local
agent in the Sniffer software to use the adapter.
Windows XP
This section describes how to install the ORiNOCO Gold adapter and driver on
a Windows XP system.
To install the ORiNOCO Gold adapter and driver in Windows XP:
1 After installing the Sniffer software, log into Windows XP as an
Administrator.
2 Insert the ORiNOCO Gold adapter in an available Type II PC card slot
on the target machine. Windows XP will automatically detect the new
card and install its native device driver.
3 Open the Network Connections folder through Start > Control Panel >
Network Connections.
4 Right-click the Wireless Network Connection entry associated with the
ORiNOCO Gold adapter and select Properties.
5 Click Configure in the Wireless Network Connections Properties
dialog box to open the Adapter Properties dialog box for the ORiNOCO
Gold adapter.
6 Click the Driver tab (Figure 3-3).