Installation guide

Chapter 4
28 Sniffer Technologies
Figure 4-2. The Add/Edit Configuration Profile Dialog Box
NOTE: Click Edit Profile to enable the OK button in the Add/Edit
Configuration Profile dialog box.
h
Select the Adapter tab in the Edit Configuration dialog box and set
the I/O Base Address and Interrupt options to the same values
you recorded for the Enterasys RoamAbout adapter in Step 6 on
page 26.
NOTE: Occasionally, Windows NT may have some difficulty installing
the wireless adapter’s driver even after allocating free resources. If this
happens, try changing some of the resource settings for the card (I/O
Base Address or Interrupt) to other free resources.
i
When you have finished configuring the Default profile for the
Enterasys RoamAbout adapter in the Edit Configuration dialog
box, click OK to return to the Add/Edit Configuration dialog box.
j At this point, you can add or edit other profiles to use the
Enterasys RoamAbout adapter. For example, if you want to use
the Enterasys RoamAbout adapter for normal wireless LAN
operations (in addition to its default role for network analysis with
the Sniffer software), you could create another profile here with
configuration information to match your wireless network (ESSID,
WEP keys, and so on; see your Enterasys RoamAbout
documentation for details).
k When you have finished adding and editing profile information,
click OK in the Add/Edit Configuration Profile dialog box.