Installation guide

Wireless Guide 31
Installing the Enterasys Adapter / Driver
13 Click Open in the Browse dialog box.
You are returned to the Install from Disk dialog box.
14 Click OK in the Install from Disk dialog box.
If the operating system is configured to alert you to unsigned drivers, a
dialog box will appear warning you that you are about to install a driver
that has not been verified by Microsoft Corporation.
15 Click Continue Anyway to continue the installation.
The wizard installs the driver. When it has finished, it displays a screen
indicating that the driver is installed.
16 Click Finish to complete the installation.
17 Click OK to clear the Adapter Properties dialog box.
18 For Sniffer Portable users: If you did not uninstall the QoS Packet
Scheduler Service during the Sniffer Portable installation, you should
disable it for this adapter now. See the Sniffer Portable Installation
Guide for details.
19 Then, turn to Creating Local Agents for Wireless LAN Adapters on page
79 to create a new local agent in the Sniffer software to use the adapter.
Windows 2000
This section describes how to install the Enterasys RoamAbout adapter and
driver on a Windows 2000 system. The procedure is somewhat different
depending on whether you are updating an existing driver for the wireless
adapter (either a previous version of the Sniffer driver or another vendor’s
driver) or installing the adapter and driver for the first time. Use the appropriate
procedure below.
 First Time Installation on page 32
 Updating Existing Drivers on page 33