Installation guide

Chapter 6
54 Sniffer Technologies
b Install the Aironet Client Utility according to the instructions on the
Cisco web site. Install with the following settings:
- When the installation program prompts you to select the
preferred server-based authentication method, select
None.
- When the installation program asks you which components you
would like to install, select all components.
5 Restart the computer and log in to Windows NT as an Administrator.
6 Insert the Aironet 340 adapter in an available Type II PC card slot on
the target machine.
7 Locate an available IRQ and IO Base Address.
NOTE: In most cases, the default resources found by the driver will
work. However, in some cases, you may need to identify free resources
as described in this step.
a
Select the Windows NT Diagnostics program from the
Administrative Tools (Common) program group under the Start
menu.
b In the dialog box that appears, click the Resources tab. The IRQs
currently in use on the PC are listed by number.