Installation guide

Wireless Guide 55

Installing the Cisco Aironet Adapter / Driver

Figure 6-1. Selecting an IRQ for the Cisco Aironet Wireless LAN Adapter

c The Cisco Aironet card can use IRQs 3 through 15. Determine if

one of these IRQs is available and write down its number for later

use.

NOTE: If all of these IRQs are already in use, you will need to make

one of them available for the Cisco Aironet adapter by uninstalling a

conflicting device.

Click I/O Port at the bottom of the Windows NT Diagnostics

window (Figure 6-1). The I/O Port windows currently in use on the

PC are listed.

e The Cisco Aironet card can use I/O Ports from 0-7F0. Determine if

one of these I/O Ports is available and write down its number for

later use.

NOTE: If all of these I/O Ports are already in use, you will need to

make one of them available for the Cisco Aironet adapter by

uninstalling a conflicting device.