System information

120 The Statistics Menu
Settings
To use the Access Points Load Monitor you will need to first configure the mode.
This is done by clicking the Settings button, which will then display the Access
Points Load Monitor Setup dialog.
• Select a Router from the list (of stations). Do so by highlighting the station. This
list is read from your address/alias list.
• “Router speed (Baud)” textbox—this is the device’s defined throughput (in other
words, enter 54000000 for 802.11a/g access points, or 11000000 for 802.11b
access points.
List and Dials View
Dials provide a “heads-up” immediate display of packets/second, bits/second, and
interface utilization.
Right-Click Menu
• Settings—displays the Settings dialog.
• Reset Column Widths—Resets the columns to their original widths.