System information

Top Talkers Statistics Mode 131
Wireless Speeds Tab (active for wireless analysis only)
This tab shows signal strength, quality, the overall rate and data rate, as well as the
packet distributions for different rates. As with all of the statistical displays in Observer,
you can configure the mode to display only the statistics that you are currently
interested in by right-clicking on the column headers.
AP Used The access point used by the system.
Statistic Description
Alias Alias of the Top Talker system, if one is available.
Address Media Access Control (MAC) address, i.e., the “hardware address.”
Packets The total number of packets sent by the system.
Avg Strength (%) The average signal strength, as a percentage of the optimum.
Avg Quality (%) The average signal-to-noise ratio, as a percentage of the optimum.
Avg Data Rate The rate of data packets on the wireless network.
Avg speed The speed of all packets on the wireless network.
Util % The percentage of bandwidth utilized.
Pkt 1 The number of packets captured at 1Mbit/sec.
Pkt 2 The number of packets captured at 2Mbit/sec.
Pkt 5.5 The number of packets captured at 5.5Mbit/sec.