System information

The MIB Editor 371
When the Forms Designer is active, Mode Commands > Align Controls submenu
contains the following items:
• Undo Last Operation—reverses the action of the last operation on the form.
Saving the form will clear the undo buffer.
• Redo Last Operation—reverses the action of the last undo operation on the form.
Saving the form will clear the redo buffer.
• Show grid—toggles the display of the grid, the rectangular array of points on the
form.
• Snap to grid—toggles whether or not objects moved or placed on the form near grid
points will be “snapped” or automatically moved into contact with those grid points.
• Align the Left Edges of the Selected Controls—causes the left edges of selected
controls or objects on the form to be aligned on the left side.
• Align the Right Edges of the Selected Controls—causes the right edges of selected
controls or objects on the form to be aligned on the right side.
• Align the Top Edges of the Selected Controls—causes the top edges of selected
controls or objects on the form to be aligned on the top side.
• Align the Bottom Edges of the Selected Controls—causes the bottom edges of
selected controls or objects on the form to be aligned on the bottom side.
• Make the Selected Controls the Same Size as the Last Selected control—causes the
selected controls or objects to become both the same height and width as the last
selected control.
• Make the Selected Controls the Same Height as the Last Selected control—causes the
selected controls or objects to become the same height as the last selected control.
Delete MIB Object
Test Form