User's Manual

74
Select one of the headings on the left-hand side to view and edit a profile’s
parameters. The Identification settings option, shown above, configures the
name, workgroup designation, and description that the computer will use
when operating in the selected profile.
The Cordless settings option, shown below, configures a Profile’s Symphony
Cordless Network parameters. Select either the “Station Settings” or “Master
Settings” tab to view additional advanced settings. For more information on
these advanced cordless parameters, refer to Appendix D. Note that the
Domain and Roaming parameters are grayed out in the Symphony Profile.
Symphony products do not support these RangeLAN2 parameters.
In the example below, a Symphony Conductor computer is using the word
“peer” as the Security Code and it is configured as a Master device. The user
configured this Security Code using the Composer Installation Wizard.
Proxim’s RangeLAN2 Cards use a parameter called “Security ID,” which is
similar to a Symphony Card’s Security Code, except the Security ID is stored
on the RangeLAN2 Card itself and cannot be read or retrieved, only overwrit-
ten. RangeLAN2 users who transport a laptop between a RangeLAN2