User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
13
9. Select the PROXIM RangeLAN2 Driver from the list of
installed adapters.
10. Configure the TCP/IP settings for the CompactFlash Card.
Note:
Contact your network administrator for information
about your network’s IP addressing scheme.
10a. If you have a DHCP server on the network, select Use
server-assigned IP address. The CompactFlash Card
will obtain an IP address automatically from a DHCP
server the next time the Proxim driver is reset.
10b. Select the Use specific IP address option if you want to
assign static IP information to the CompactFlash Card.
Enter an IP address, Subnet mask, and Default Gateway in
the fields provided, as shown in the following example.