User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
40
Note that changes to the Domain setting will not take effect
until after you have tapped the <OK> button in the upper-right
hand corner of the Proxim Status utility.
To change the Security ID, follow these steps:
1. Tap the <Set Security ID> button to display the following
screen:
2. Enter a new Security ID in the field provided.
3. Tap the <OK> button (located below the Security ID
field).
4. Make any additional changes to the card’s setting and tap
<OK> to exit the Proxim Status Utility.