User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
41
Note:
To return the Security ID to its default setting, leave
the Security ID field blank and choose <OK>.
Advanced
Select the Advanced tab to change the card’s Inactivity Sec-
onds, Inactivity Minutes, and Roam Config settings, as shown
in the following example.
Refer to Chapter 4 for more information on these parameters.
Note:
Any changes to these settings will not take effect until
after you have tapped the <OK> button in the upper-
right hand corner of the Proxim Status Utility.