User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
46
2. Within the ActiveSync dialog box on the Windows CE
device, the connection method must read “Network Con-
nection” and the remote computer’s name should appear in
the “Connect to:” box.
3. If the network does not have a WINS (Windows Internet
Naming Service) server, then you must configure the
WINS server on the Windows CE device with the IP
address of the computer with which you want to establish
an ActiveSync session.
In the example below, the CE device will successfully
ActiveSync with the desktop computer whose IP address
is 192.168.0.2.