User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- The Product Package
- System Requirements
- 2. Installation
- Driver Installation
- Hardware Installation
- Software Configuration
- Removing the CompactFlash Card
- 3. Wirefree Topologies
- Mobile Connectivity to a Desktop Computer
- Mobile Connectivity to a SOHO Network
- Mobile Connectivity to a Corporate Network
- Guidelines for Roaming
- 4. Configuration Parameters
- Operating Mode
- OpenAir Radio Communication
- OpenAir Masters and Stations
- OpenAir Channel and Subchannel
- OpenAir Software Parameters
- Domain
- Security ID
- Roam Config
- Inactivity Timeout
- HomeRF Radio Communication
- Security ID
- 5. Proxim Status Utility
- Status Monitor
- Status
- Configuration
- Advanced
- About
- 6. Performance Hints
- Microwave Ovens
- Range
- A Note Concerning Inactivity Timeout
- 7. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Application Tips
- ActiveSync
- Pocket Internet Explorer
- Common Technical Support Questions
- A. Specifications
- B. Parameters
- C. How to Reach Technical Support
47
Follow these steps to configure the Windows CE device’s
WINS address:
1. Tap the Start icon, located in the upper left-hand side
of the iPAQ’s screen.
2. Select Settings from the drop-down menu.
3. Tap the Connections tab.
4. Tap the Network icon.
5. Select the PROXIM RangeLAN2 Driver from the list of
installed adapters.
6. Tap the Name Servers tab.
7. Enter the IP address of the computer with which you want
to establish an ActiveSync session in the WINS field.
8. Tap <OK>.
9. Remove the iPAQ from the Compact Flash Expansion
Packet and reinsert it to reset the Proxim driver. Alterna-
tively, press the reset button to reset the iPAQ.
Pocket Internet Explorer
If the Windows CE device is unable to browse the Internet
using Pocket Internet Explorer, contact your network adminis-
trator to ensure that you have the correct settings configured on
the Windows CE device.