Installation guide

Hardware Overview and Installation
ORiNOCO® 802.11n Access Points - Hardware Installation Guide 15
2.2 ORiNOCO® AP-8100
2.2.1 Front View of the Device
Figure 2-5 Front View of the Device
The front panel of the device contains the following components:
2.2.1.1 LED Indicators
Tabulated below are the four LEDs, that are available on the front panel of the device:
2.2.1.2 Reload
Reload feature helps to restore the device to factory default configuration, when:
– The device cannot be accessed through web interface or command line interface.
– The device does not initialize.
– The password is lost.
For more details, see Recovery Procedures and Forced Reload procedures, detailed in the ORiNOCO® 802.11n Access Points -
Software Management Guide.
LED Symbol Description
Power LED This LED indicates whether the device is switched
ON/OFF.
Ethernet LED This LED indicates the status of the traffic over the
wired ethernet LAN.
2.4G (Wireless
Interface 2) LED
This LED indicates the status of the traffic over the
wireless interface (radio) 2.
5G (Wireless
Interface 1) LED
This LED indicates the status of the traffic over the
wireless interface (radio) 1.