Installation guide

ORiNOCO® 802.11n Access Points - Hardware Installation Guide 22

Hardware Specifications

3.1 ORiNOCO® AP-800 and AP-8000

This chapter covers the hardware specifications of the following products:

• ORiNOCO® AP-800 and AP-8000

• ORiNOCO® AP-8100

Category Specification

Radio Module Single Radio Access Point (AP-800) / Dual Radio Access Point (AP-8000)

3x3 MIMO per radio

Wireless Protocol 802.11a/n

802.11a

802.11g/n

802.11g

Frequency 5.150 - 5.850 GHz*

2.4 - 2.483 GHz*

* Subject to Individual Country Regulations

Channel bandwidth 20MHz and 40MHz for 802.11n

20MHz for 802.11a/b/g

Modulation • MCS0 - MCS15 for 802.11n (6.5 Mbps -300 Mbps)

• BPSK, QPSK, 16-QAM and 64-QAM for 802.11a and 802.11g (6 Mbps - 54 Mbps)

• DSSS for 802.11b (1 Mbps -11 Mbps)

Device Interface Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet

Antenna Connector: 3 RP-SMA connectors for AP-800

6 RP-SMA connectors for AP-8000

LED Indicators Refer Step 5: View LEDs

Antennas 3 Single-Band (AP-800) / 6 Dual-Band (AP-8000) Omni-Antennas and reverse SMA connector

with 3 dBi gain.

Network Architecture Type Infrastructure

Transmit Power

* Combined Tx Power values

Operational

Modes

Transmit Power*

(dBm)

20 MHz 40 MHz

802.11b 19 -

802.11a/g 17 -

802.11na/ng 16 14