Installation guide

Hardware Specifications
ORiNOCO® 802.11n Access Points - Hardware Installation Guide 24
3.2 ORiNOCO® AP-8100
Category Specification
Power Requirements Power Adapter: 12V/1.25A
Power over Ethernet (PoE) (optional): 48V / Any 803.3af compliant Gigabit PoE
Radio Module Dual Radio Access Point, 2x2 MIMO per radio
Radio1: IEEE 802.11a/n
Radio2: IEEE 802.11b/g/n
Wireless Protocol 802.11a/n
802.11a
802.11g/n
802.11g
Frequency 5.150 - 5.850 GHz*
2.4 - 2.483 GHz
* Subject to Individual Country Regulations
Channel bandwidth 20MHz and 40MHz for 802.11n
20MHz for 802.11a/b/g
Modulation • BPSK, QPSK, 16-QAM and 64-QAM:
– With data rates of 6.5 Mbps -300 Mbps for 802.11n
– With data rates of 6 Mbps - 54 Mbps for 802.11a and 802.11g
• DSSS, CCK: With data rates of 1 Mbps -11 Mbps for 802.11b
Device Interface Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet
LED Indicators Refer Step 4: View LEDs
Antennas 4 Modular High Efficiency built-in PIFA Antennas with a peak gain of:
– 3dBi for 2.4 GHz frequency.
– 4dBi for 5 GHz frequency.
Network Architecture Type Infrastructure
Transmit Power
* Combined Tx Power values
* MCS refers to Modulation Coding Scheme.
11b 11a/g 11n
Data
Rates
(Mbps)
Transmission
Power*
Data
Rates
(Mbps)
Transmission
Power*
Data
Rate
(MCS*)
Transmission
Power*
1 to 11 20 6 to 48 20 MCS
0 to 5
20
MCS 6 19
54 20 MCS 7 17