Installation guide

Hardware Overview and Installation
ORiNOCO® 802.11n Access Points - Hardware Installation Guide 9
2.1 ORiNOCO® AP-800 and AP-8000
2.1.1 Hardware Overview
Figure 2-1 Device Overview
Following sections give you a hardware overview of AP-800 and AP-8000.
2.1.1.1 LED Indicators
Tabulated below are the four LEDs, that are available on the top panel of the device:
2.1.1.2 Antennas
The device comes with 3x3 MIMO omni-directional antennas that are easy to install. Proxim also recommends you an optional
accessory- Range Extender Antenna (REA), which has 3 x RP SMA plug, that can be easily connected to the device. See
Installation Procedure, for details on installation of antennas.
: AP-800 comes with a single radio and 3 omni-directional external antennas. AP-8000 comes with two radios and 6
omni-directional antennas, 3 per radio.
LED Symbol Description
Power LED This LED indicates whether the device is switched
on/off.
Ethernet LED This LED signals the traffic on the wired ethernet
LAN.
Wireless Interface
(Radio) 1 LED
This LED provides the status of the traffic on wireless
interface (radio) 1.
Wireless Interface
(Radio) 2 LED
This LED provides the status of the traffic on wireless
interface (radio) 2.
ORiNOCO® AP-800 ORiNOCO® AP-8000