User`s guide

P/N 7630.0057 Rev D 5
Repeating Enabled / Disabled
When configuring the RangeLAN2 7500 via the CFG tool, as one of the RangeLAN2 configuration
options, you can choose to enable or disable repeating. When repeating is enabled and the
RangeLAN2 7500 is configured as a Master, it will repeat any signal coming from one Station and
destined for another Station, if the two Stations are both within range of the Master but not within
range of one another. The advantage of repeating is the ability to double the effective range of the
RangeLAN2 network. However, be aware that by enabling the repeating feature, the network
performance will drop by as much as half the speed while repeating occurs.
Master
(repeating)