Specifications

14
ADVANCED VIDEO SCALER
5.2 S1 DIP Switch
The three-position DIP switch S1 is used to set the input video standard that the
Advanced Video Scaler will look for on its inputs. All video standards are based on
either 525 or 625 lines per frame. Most of the world is either NTSC-M or PAL-B
and the default setting should be adequate for almost all applications. However, if
the format of the video you are using is not either one of these, you can adjust the
DIP switch S1 as follows:
S1-1 S1-2 S1-3 525 lines detected 625 lines detected
ON* ON* ON* NTSC-M* PAL-B*
OFF ON ON NTSC-M PAL-B
ON OFF ON NTSC-J PAL-B
OFF OFF ON NTSC-M PAL-B
ON ON OFF PAL-M PAL-B
OFF ON OFF NTSC-M PAL-N/4.43
ON OFF OFF NTSC-M SECAM
OFF OFF OFF NTSC-M PAL-N/3.58
*Default settings.