Specifications

ADVANCED VIDEO SCALER

NOTE

DO NOT change the five-position DIP switch S3. If it’s changed by

mistake, reset it to the following factory default settings:

S3-1 ON

S3-2 OFF

S3-3 OFF

S3-4 OFF

S3-5 OFF

5.3 S2 DIP Switch

DIP switch S2 is used to set the type of sync on the outputs. Vertical sync is always

present on the BNC connector labeled V. Separate horizontal and vertical syncs

are always present on the VGA Compatible connector. The BNC connector labeled

H/CS can output either horizontal sync or composite sync as follows:

S2-1 S2-2 Function of H/CS connector

ON EITHER Horizontal sync only

OFF OFF Composite sync with serrations

OFF ON Composite sync without serrations