Specifications

10
ADVANCED VIDEO SCALER
3. Installation
Installing the Advanced Video Scaler consists of three easy steps: connecting the
power, connecting inputs and outputs, and selecting the desired output
parameters.
3.1 Connecting the Power
Connect the provided AC power cord to the power supply and connect the power
cord to an AC outlet. The power supply is auto-sensing, so it will automatically
adapt to your voltage anywhere in the world.
Connect the DC power plug from the power supply to the connector marked
POWER on the rear panel of the Advanced Video Scaler.
3.2 Connecting Inputs and Outputs
Connect a video source to either the Composite or S-Video input on the rear
panel.
Connect a computer monitor, projector, or display to either the BNC
connectors or the VGA compatible connector on the rear panel. Both outputs
may be connected at the same time to two different displays.
3.3 Selecting the Output Parameters
On the front panel of the Scaler, press the Function button to light the LED next
to Output Format. Use the Select button to select the desired output resolution.
NOTE
The resolution selected should match the native resolution of the
projector or display, not the highest resolution that the device will
support. An extensive listing of the native resolutions of various
projectors and displays starts on page 20.