Specifications

Setting Up the Lightbook Projector 1-3
CONNECTOR PANEL
All connections between the projector and your computer or video source
are made on the side connector panel.
Computer InSerial S-Video Video In
L
A
M
P
10
R
In–Audio–Out
Monitor Out
O
I

11
9
10
1 2 3 4 5 6 7 8
Figure 1-4 The Connector Panel
CONNECTOR DESCRIPTION
1 SERIAL Connects to your computer so you can use
Cyclops F/X software. Use a serial connector
for a PC, ADB connector for a Macintosh.
2 COMPUTER IN Connects computer video to the projector.
3 MONITOR OUT Provides computer video output to a separate
monitor.
4 S-VIDEO Allows S-Video video input.
5 VIDEO IN Allows video input from an NTSC, PAL, or
SECAM source.
6 L-AUDIO-R Allows stereo/mono audio input from an NTSC,
PAL, or SECAM source.
7 AUDIO IN Allows stereo/mono audio input.
8 AUDIO OUT Provides audio output to an external stereo
system.
9 AC CIRCUIT BREAKER Restarts the system after a power failure.
10 AC PLUG Connects AC power.
11 AC POWER Turns the projector on or off.