User`s guide

Setting Up Your Projector 1-21
IMPORTANT PRECAUTIONS
To avoid any potential hazards to the projector, make sure the air intake and
exhaust grills are unobstructed. Do not operate the projector if these areas
are clogged or blocked.
Figure 1-26, Allow sufficient air flow
CAUTION! The lamp chamber gets very hot during operation, especially
the ceramic sockets at each end of the lamp. Be very careful when opening
the lamp chamber or changing the lamp. To allow that area to cool down,
press the
key to turn off the lamp and let the fan cool the projector for at
least five minutes before you touch any of those components. See Chapter 5,
Maintenance , for more information.