Datasheet

36
Solid carbide saw blade
50mm diameter (10mm bore). 0.5mm thick. Fine too-
thed (80 teeth): ideal for cutting fibreglass sheets up to
3mm, non-ferrous metals, duro-plastics and other ‘difficult’
materials.
NO 28 011
Saw blade made of high-alloy special steel (HSS). 50mm diameter
(10mm bore), 0.5mm thick. Alloy holding a high proportion
of tungsten, vanadium and molybdenum for an even
structure, high hardness and long lifetime. Fine-toothed
(100 teeth). For very fine cuts in non-ferrous metals (alu-
minium, brass, copper). Also suitable for cutting com-
pound materials like PC cards, and sawing wood and
plastics.
NO 28 020
Tungsten tipped saw blades
50mm Ø x 1.1mm (10mm bore). 10 teeth. Used to cut
hard and soft woods, PC cards, PERTINAX and aluminium.
N O 2 8 0 1 6
50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely
clean cuts of balsa, plywood. Can also be used for cutt-
ing PC cards and POLYCARBONATE.
N O 2 8 0 1 7
For perfect straight cuts in wood, non-ferrous metals,
plastic and PC cards.
Bench circular saw KS 230
Machined, die-cast aluminium table
of 160 x 160mm.
‘Super-Cut‘ blade (58mm
diameter), 80 teeth, individually
set and sharpened, is included.
Motor: low noise and persevering
for prolonged use.
Base of ABS with a sawdust door
on the right.
Adjustable fence
with scale.
The ‘Super-Cut‘ saw blade (Ø 58mm) cuts soft wood up to a
thickness of 8mm.
Low noise and persevering AC motor with high life expectancy.
Power transmission by toothed belt ensures the right blade speed
for the job with approx. a doubling of torque. Cutting performance
in wood up to 8mm, plastics (also PERTINAX printed circuit boards)
up to approx. 3mm, non-ferrous metals up to approx. 1.5mm.
Even fibreglass reinforced PC cards can be cut by using a carbi-
de saw blade. Adjustable mitre fence with scale. Angle stop with
degree graduation. Flat-milled worktop of die-cast aluminium (160
x 160mm).
Technical Data:
230V. 85 W. 8,000rpm. Weight approx 1.8kg.
NO 27 006
Note:
You will find the larger version of the circular saw
KS 230 (type FET) on pages 42/43.
Very important when sawing:
use our vacuum cleaner adapter for a cleaner
work environment.
Diamond blade. 50mm diameter (10mm bore).
With 0.5mm layer of class ´D107´ diamond for
cutting ceramics, porcelain, tiles, stone as well as
PC cards.
NO 28 012
Crosscut ‘Super-Cut’ blade 58mm diameter (10mm bore).
80 alternately set teeth. Ideal for hard and soft
wood as well as plastic and Pertinax. For fast, clean
cuts. Teeth are individually set and sharpened.
Superior cutting power!
NO 28 014
Graduated mitre stop.