Datasheet

38
1,8
38
1,8
28
NO 28 282 NO 28 982 NO 28 983 NO 28 987 NO 28 989
NO 28 774 NO 28 776 NO 28 772 NO 28 778 NO 28 781 NO 28 783 NO 28 782
NO 28 830 NO 28 810 NO 28 812 NO 28 820
20
20
Ø 18
Ø 18
13
9
13
9
2,5
2,5
2,35
7,0
7
6,0
6
5,0
5
9
13
8
13
3
5x 5x 5x 5x 3x 3x 3x
5x
16
19
22
1,8
1,8
1,8
22
1,8
22
1,8
50x10x
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stain
Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
4-piece glass working set
One 2.3 ball-shaped and cylinder shaped fine milling bit each. One each
ball-shaped and cone-shaped white corundum grinding bit. One each 1 and
2.3 micro drill. 5 cutting discs Ø 22. One saw blade Ø 22 (only in combination
with the protective device 28 944) and arbor Ø 2.35.
NO 28 910
2 diamond grinding bits and 2 silicon carbide grinding bits.
For engraving, grinding or frosting glass. Diamond bit 1: ball
Ø 1, diamond bit 2: ball Ø 1.8, silicon carbide bit cone 3/2 x
5, and bullet 2/2.5 x 7. All shafts Ø 2.35.
NO 28 920
13-piece set for model makers
Abrasives
Selected cutting, sanding and polishing bits for professional use and long
For
steel
stainless steel
cast iron
wood
For
steel
cast iron
HSS steels
For
wood
steel
stainless steel
Grinding points and discs
Cutting bits
Nylon fleece brushes for cleaning, frosting
and sanding steel, stainless steel, non-ferrous
metals, etc. Shaft ø 2.35.
5 x gr. 120
5 x gr. 150
10 x gr. 120
10 x gr. 150
5 x gr. 80
5 x gr. 150
5 x gr. 80
5 x gr. 150
Sanding discs, caps and bands are made of standard corundum. The sanding compounds have a
diffe-rent application areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron,
to the material to be sanded. Steel high, wood medium and plastic low rotational speed. Sanding bands
High quality corundum grinding bits. Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range
and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimen
ensuremaximum concentricity. Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
Cutting blades made of spring steel
0.1mm thick. For plastic, wood and non-fer-
rous metal. Shaft Ø 2.35. For free- hand work
use of the protective device 28 944 (see bot-
tom right)!