ProxxonTools.
1 1 Fig. 1 Fig. 2 Fig.
GB PROXXON PS 13 Dear Customer, Before putting the machine into operation, read the enclosed safety rules and operating instructions. General Safety Rules Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term „power tool“ in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool, also machines and electric units.
h) Only allow trained personnel to use the power tool. Apprentices may only operate the power tool when they are aged over 16, when this is necessary for their training and when they are supervised by a trained operative. 4.) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off correctly.
Then turn the clamping mechanism (1) 90° to the right again. The insert is now locked. Attach suitable sandpaper (self-adhesive), as shown in fig. 3. Switch on the device switch and hold the pen grinder like a ballpoint pen. The grinding movement (the stroke) goes from top to bottom and vice versa. Simply remove and replace worn sandpaper.