Operating Guide

ManualsBrandsProxxon ManualsTools & HardwareDetail Sander OZI 115/E

ProxxonTools.com

We reserve the right to make further alterations for the purpose of technical progress.

Art.-Nr. 385201-99 PR 710703700J

SERVICE AND REPAIR

Your device does not work properly? Please read the operating

instructions again carefully. If the unit is in fact defective, please

send it to:

Prox-Tech, Inc.

Attn.: PROXXON Service Center

2555 Tate Blvd. S.E.

PO Box 1909

Hickory, NC 28603-1909

Please make sure, that your tool is carefully packaged and inclu-

de a copy of your dated proof of purchase. You will help us to

react even quicker, if you describe the problem in short and plea-

se don’t forget to include your name, address and daytime

telephone number. We will respond in a prompt and reliable

manner.

Spare Parts

You can also order any necessary spare parts from our Service

Center at the above address. Please check the article-number of

the tool concerned on the nameplate of the tool and define the

part needed by using the explosion drawing in the manual that

came with the tool. Every part has a specific number (5 digit-

XX). Please provide us with this number when ordering.

For any further information call us toll free at 1-877-PROXXON

(1-877-776 9966) or visit us on the web at www.proxxon.com/us.

Made in Luxemburg

Distributed in the U. S. by Prox-Tech, Inc

230 V

3 V

döjfk

dgj

sdgbjd

j döfjdk

gfjk

lfida dlg

,dl

dgfd

l fg

12 V

- 2 -

Manual

DELTA SANDER OZI 115/E

Summary of content (7 pages)

PAGE 1
23 12 12 VA 12 VA VA dö 0 V jf dlf kdg ida j sd 3 dlg gb VA ,dl jdsg gd jd dg öfjd 3 V fdl kg A fg fjk ProxxonTools.
PAGE 2
-2-
PAGE 3
23 7 12 12 VA 12 VA VA dö 0 V jf dl f k dg ida j sd 3 dlg gb VA ,dl jdsg gd jd dg öfjd 3 V fdl kg A fg fjk 3 4 5 6 1 2 Fig. 1 Fig. 2 Fig.
PAGE 4
PROXXON - OZI 115/E Dear Customer, Before putting the machine into operation, read the enclosed safety rules and operating instructions. GENERAL SAFETY RULES Warning! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
PAGE 5
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. Remove adjusting keys or wrenches before turning the tool on.
PAGE 6
Symbols Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
PAGE 7
Weight approx. 1,7 lb (780 g) Characteristic noise emission 74 dB(A) Noise level may exceed 85 dB(A) during operation. Ear protection must be worn! Vibration at handle < 2.5 m/s2 Double insulated tool Proper handling of the machine Replacing grinding pads 1. Hold grinding pad at one corner (Fig. 3) to remove. 2. Place new grinding pad on grinding shoe to fit, and then press on firmly. Note: Replace dull grinding pads promptly.