/ W = 13 22 /6 0 axx 50 5 0 00 10 n m 0/m 00 .0 in 58 .:: 5 Nrr.
S MO 0 V~0 Hzaatt in 0/m 00 .0 1 / W = 13 22 /6 0 5 00 50 10 max n 3 2 3 20 0-0 00 58 .:: 5 Nrr.: D 45 -55 18 ie N b rrss h ac 1 5 4 7 6 SB H AC Fig. 1 Fig.
Fig. 3 Fig.
Operating Instructions PROXXON-MICROMOT Motorized Carver MOS Before putting the machine into operation, read the enclosed safety rules and operating instructions. Warning! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Dear customer, Save these instructions. Congratulations on your purchase of a PROXXON MICROMOT Motorized Carver MOS.
28. Keep your hands away from rotating or fast-moving tools (saw blade, etc.). 29. Always keep the operating instructions close at hand. GENERAL SAFETY RULES Warning! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAFE THESE INSTRUCTIONS Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Service: Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia etc.
WARNING! Please note the following: Pull out the mains plug before carrying out any work on the unit! In any case ensure that the switch is set to the "OFF" position in order to prevent the unit starting up again accidentally or unexpectedly. Operation of the Motorized Carver MOS: Inserting or replacing the blades (Fig.
PROXXON-Micromot Motorized Carver MOS Parts list MOS (article-number 38642) Please order spare parts in writing from PROXXON Service center (Address on back of instruction manual) Part no.: Designation Part no.
-9- 1 2 3 4 5 18 19 6 7 8 9 12 20 dö V jf dlf kdg ida j sd 3 dlg gb VA ,dl jdsg gd jd dg öfjd 3 V fdl kg A fg fjk 12 12 VA 12 VA VA 21 10 31 22 36 11 23 12 13 24 14 15 25 16 17 26 30 28 27 29
SERVICE AND REPAIR Your device does not work properly? Please read the operating instructions again carefully. If the unit is in fact defective, please send it to: Prox-Tech, Inc. Attn.: PROXXON Service Center 2555 Tate Blvd. S.E. PO Box 1909 Hickory, NC 28603-1909 Please make sure, that your tool is carefully packaged and include a copy of your dated proof of purchase.
